How To Flash ur Phone Using Phoenix

How To flash ur Using Phonenix

[Step by Step Guide With Screenshots And Tutorial]

Credits To:
X.Factor for Telling Posting Method
ToηyMoηtaηa for Telling Correct Section To Post
evildevil for Taking Screenshots
Rahul ♪♫♫ for Telling Best Flashing Softwares
Rahul for Giving Direct Links To Those Softwares
Deathunter for Making The Full Reports Of This post

Overview:
Using This Tutorial u will Be Able To flash Ur Phone with The Firmware U have. It\'s Risky So Follow The Procedure Strictly.

Tools Required:
1.Phoenix Service suit:
Direct Download:

CODE

dl01.seliweb.com/files/temp/phoenix_service_sw_2007_4_6_170.exe

2.Diego,Dongle & Phoenic cracks:
Download Link:

CODE

http://www.mediafire.com/?cx7cozjhn1t

3.UFS Suite Setup:
Download Link:

CODE

http://rapidshare.com/files/13561888/UFS_Suite_Setup_v03.04.000.exe.html

Before Flashing:

- backup your phone number and phone number of important personal information, such as brush-after information will not!
- brush download software and firmware, and look at your cell phone version, and then select the corresponding firmware refresh! This is important!
- ready for data lines, mobile phones, needs a sufficient battery power! Brush-fee, compared! The best plug in the charger!
- the installation of a clean system, and then install the software brush! (Do not have to clean install XP, but to ensure that your system in no NOKIA on the paper, drive and registry, the registry can master the use of clean-up optimization WINDOWS!)
- remove the memory card in the phone!


NOTE: Phoenix installed software, please delete all the computers and related software and NOKIA drivers (including NOKIA PC Suite). And computer-C Program Files folder in the folder NOKIA deleted. Then the computer-C Program Files folder in the Common Files folder in the folder NOKIA deleted. Delete Nokia_PC_Suite_Cleaner finished with the best time to clean up. Brush machine will not move as much as possible in the course of the computer. Phone and data lines. Otherwise lead to the data line connection is bad, will cause brush Dead.


================================================================================
Lets Start.......

->Run and install the following file: Diego 3.09.msi





->Run Phoenix Service Software 2007.



->Open The Dongle Crack First. Just Open It, Don’t Run It



>Start Installing Phoenix 2007



->. During The Installation You’ll Get An Error Message.



->Press on “Retry” and run the dongle crack immediately after! (Check that the destination folder is Windows/system32 of the crack). If you’re not fast enough, the message will reappear and you’ll have to re-run the crack the same way as above (but faster…)




>You’ll get 2 error messages, \"DESKEY\" Just Press OK, And Then Finish

Mozilla

Apr 25 2008, 01:40 PM

->Run the Phoenix 2006 crack


-> Install UFS Suite Setup





->Select "UFS_DCTxBB5" and Then Tik "Flash loaders"





-> Now Install Firmware as I have RM-156_apac_us_30.0.013_v4.0.exe, Do not change drive letter, can be installed directly.





->Now Run Phoenix 2007


-> ###### Maintain and Add Details

Mozilla

Apr 25 2008, 01:53 PM

->After Adding Details ###### Ok



->Remove the SIM card, and memory card from your phone.

->Turn on the phone (it will start in offline mode because there is no SIM card inside).
->Plug in the USB cable to both the phone and the computer.
->When prompted, select "PC Suite" from the menu list on the phone.
->Wait for *all* drivers to fully install themselves before proceeding. You will see the driver icon disappear when it is complete.

-> Now Choose File Then Manage Connection


->###### "New"


->###### USB, and then ###### Next


->It will then search your USB ports for the phone. When it finds it, hit Finish.


->Once it has finished scanning, ###### apply, then ###### close.


->Next, select "Scan Product" from the File menu.


->From the Flashing menu, choose Firmware Update.


->Wait for Phoenix to continue talking to the phone. You will see some information scroll by in the firmware Update window.
->###### Browse


->See the product code section.U should find ur product code in that column.If u see "ur" product code,well and good.

-> but if u dont see ur code,or dont see anything for that matters,press on the "..." in the given prCode section.
Select any one prCode which says APAC1 or APAC2, or euro1 or euro2.###### on one of them and press ok.


->Press Start


The flashing process takes about five minutes to complete. The first few steps ensure connectivity to the phone.
After it verifies connectivity, Phoenix will automatically restart the phone.

Mozilla

Apr 25 2008, 01:55 PM

Once it has completed (a dialog box will popup saying it has completed successfully), you may close Phoenix,
unplug the USB cable, and restart your phone. It should startup with the firmware you flashed to it.




=====================================THE END=========================================